• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost Immobiliser 2

Guards your vehicle against key cloning & stopping thieves driving your vehicle with the keys you originally had. Our most recent immobiliser is connected to your vehicle's CAN data network and a unique PIN must be entered to start the engine.

In contrast to trackers, ghost immobiliser tracker does not transmit any radio frequency signals & can't be detected using diagnostics tools. It also has no indicators in the form of LEDs or buttons that give the impression that it is in your car or van.

Anti-key cloning

The Ghost immobiliser was designed to prevent key cloning. This device connects to the CAN data network in your vehicle and generates an unique pin code sequence that is activated by pressing the buttons from the factory on your dashboard as well as the steering wheel. This prevents thieves from being able to start your vehicle. If the wrong PIN is entered, it will prevent your engine from starting, making it impossible to leave with your pride and Joy.

Ghost immobilisers are new technology that is extremely difficult for thieves to defeat. The ghost immobiliser, unlike physical deterrents like wheel locks and steering locks that are able to be cut, is a discreet electronic device. It's not even detected by thieves because it emits no radio signals and operates silently.

The next-generation immobiliser protects your vehicle from a range of threats, including key hacking relay attacks, key-hacking, and copied copies. It is also able to stop the thief from adding an additional key or replacing your ECU in the sense that it will not allow the car to start without entering the correct PIN code first.

In contrast to other immobilisers the ghost immobiliser 2 (check out your url) doesn't require a remote or key fobs to operate. It can be turned off by the driver's smartphone by using a simple app. This makes it ideal for those occasions when you have to give your car over for valet parking or servicing without the key fobs.

The Autowatch ghost car immobiliser-II is the latest version of our revolutionary ghost immobiliser. It was designed to be easy and convenient to use while remaining as secure as possible. This is achieved by connecting the Ghost-II into the vehicle's data network CAN, meaning that there aren't any additional wires to hide or easily found. It has a built-in feature which allows you to deactivate the Ghost-II simply by connecting to your vehicle's Bluetooth.

OBD port hacking

OBD port hacking is a new technique employed by professional auto thieves to steal cars. Thieves are able to access your vehicle's OBD with an laptop, mobile application, and cables that can be bought online for less than PS50. Once they have access, they are able to do anything they like to do, from resetting your vehicle's fault codes to tuning your vehicle, or taking it away in less than a minute.

It can protect your vehicle from being taken away by requiring a unique PIN number to be entered along with your key fob prior to you start the engine or leave. It communicates with the vehicle's ECU (Engine Control Unit), using the CAN Data Circuit. This is undetectable by any scanners for RF or code grabbing. It has a Service/Valet Mode that allows your vehicle to start without the PIN code.

You will also need an OBD cable that has OBD pins, which are connected to the CAN bus. These cables are available on Amazon/Ebay for around PS50. You will also require a cable that has OBD pins connected to the CAN Bus. These cables can be bought on eBay or Amazon for PS50. You then need to splice the cable into the wiring harness of your car for example, the radio wiring harness.

Once the hacker has gained access to the OBD port of your vehicle, they will send diagnostics to the system at a high baud rate, which will crash the car's CAN and prevent the systems from working. This can cause the engine to stop or even lock doors, and even the brakes to engage.

No need for additional remotes or key fobs

An immobiliser for your car is a fantastic piece of anti-theft technology that is used by millions of modern vehicles around the world. An aftermarket immobiliser safeguards your vehicle through the use of engine ECU software that blocks cars from starting if the transponder is false.

It is possible for a thief to know the code that disables an immobiliser, and bypass it. A thief could easily remove the battery from many key fobs by squeezing them open. They could then use an easy tool to remove the internal circuit board from an immobiliser and replace it with blank. Then, they will be able to start your car.

With the TASSA approved Ghost 2 immobiliser, there are no additional keys or remotes required. The immobiliser connects directly to the vehicle's ECU (Engine Control Unit). This is done via a discrete, quiet CAN data loop that cannot be detected by diagnostic tools, such as those used by high tech thieves. It does not have a traditional keyfob with LED indicators, so it is invisible.

There will be occasions where you have to disable Autowatch Ghost 2's automatic security for example, when you are doing an valet parking or a service job. The ghost CAN immobiliser has a special mode for this, called "Service Mode' which can be activated with just pressing a button on your phone. The car is still operated, but the maximum speed is restricted to 36 mph for added security.

If you'd like to learn more about the TASSA certified ghost immobiliser, call us today to arrange an appointment in our workshop. A member of our team will explain the process, and give you your Ghost 2 emergency card, installation certificate, and security guarantee.

Simple process to change the PIN code

Ghost is a next generation device that secures your vehicle without cutting wires or putting in aftermarket key fobs. It is directly connected to the vehicles CAN data network and a unique PIN code is programmed into it via buttons on your steering wheel & dash. The device does not emit RF signals, which means it is not able to be tampered with. This makes it impossible to be detected using sophisticated scans of RF and code-grabbing technologies used by modern thieves.

The PIN code can be changed to block previous drivers or even include an override code in case you forget the sequence. When installing, the installer will demonstrate how to install ghost immobiliser to accomplish this. The system has a valet-mode feature that allows you to temporarily disable pin input sequences so that your garage or mechanic can service the vehicle without knowing the pin number. This is ideal for customers who want to hand over their car for valet parking or service, but don't want divulge the PIN sequence.

Unlike Thatcham products that require additional key-fobs to operate, Ghost is a discreet system which takes advantage of the buttons in your vehicle to create a unique and interchangeable PIN code sequence. This sequence is entered through the app on your smartphone, which means no extra LED indications are displayed and your vehicle is protected with no risk of being disabled by hackers or any other technology.

Tested for each vehicle

A ghost immobiliser, in contrast to key fobs which require pressing buttons, is discretely installed under the dash or steering wheel. Only you will know it's there. The device is connected to the vehicle's CAN data network and an individual PIN code is programmed by using the buttons already on your car. The system then prevents your engine from starting unless the code is entered before. This means that thieves are unable to duplicate the keys of your car or use the OBD to hack into it.

Ghost can be used in all vehicles that use electric vehicles motorhomes, vans, motorhomes and bicycles. It's also incredibly versatile and can be programmed to deactivate in a variety of situations. For instance, it can be programmed to enter Valet mode when the vehicle is taken to a valet parking or servicing company. This means that your car can be operated within a specified 30mph speed limit and the ghost immobiliser will be activated once it is returned to your property.

The device can be reset at any time to your personal PIN number. This is beneficial if you forget the code or the device ceases to function which means it's as good as new again.

It is also unnoticed by anyone who doesn't know about it is. This is due to it running through the buttons on the dashboard of your car and on the steering wheel, and utilizes the information they send to identify which button has been activated. This makes it a safe and reliable security system that cannot be altered through RF scanning or jamming, or even a door lock pick set.