• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Maintain a Woodburning Stove

A wood-burning stove can be efficient and efficient way to heat your home. It is essential to maintain your woodburning appliance to ensure its maximum performance.

Tip: Choose seasoned wood with low moisture content. This will allow you to burn the wood for longer and produce more heat.

The state environmental agencies are trying to find a solution for the issue of particulate matter pollution caused by old wood-burning stoves.

How They Work

Wood-burning stoves, as their name suggests are made of wood that produces heat. They accomplish this by enclosing the fire within a metal and glass body. This also helps keep the temperature inside your home at a consistent level. It also acts as a barrier that prevents smoke from entering the living space.

Stoves control combustion by controlling the amount of oxygen they allow into the fire. This is done via one or more air vents that can be shut and opened to regulate the amount of oxygen flowing in to the fire.

Modern stoves use either catalytical or non-catalytical technology to control this. Catalytic stoves have a catalytic converter which is designed to burn the gasses produced during primary combustion, so that they do not escape into the room. Non-catalytical stoves don't have a catalyser and rely on secondary combustion within the firebox in order to reduce emissions.

It is recommended that you only burn firewood that is seasoned in your wood-burning fireplace. It should have a moisture content less than 20%, which allows the fire to burn effectively. This will decrease the amount of smoke and harmful pollutants that are released from the flue and will also prevent the glass of your stove from being stained by creosote. Creosote is the by-product of burning wood, and it can accumulate over time.

In addition to reducing emissions, using seasoned wood can save you money on heating costs by producing more heat from a given amount of fuel. This is due to the surface area of the wood that is drier is greater and produces more heat per volume.

Wood smoke can be harmful to anyone, but it is especially harmful to children and adults with weak lungs. It can also irritate people with lung conditions like asthma or chronic obstructive respiratory disease (COPD). If you reside in an area that has been designated as a smoke control zone, it is crucial to ensure that your stove is cleaned and fitted with an appropriate chimney that meets the required standards for the area.

Burning Wood

Woodburning stoves provide a clean, renewable heat that is an excellent option to keep the house warm during power outages. They also reduce carbon dioxide emissions from fossil fuels such as gas and oil that can be harmful to the environment.

Modern woodburning stoves are more efficient than earlier models, 913875 and they are designed to prevent the build-up of creosote. However it is crucial to monitor combustion. Creosote is a dangerous by-product of a poorly burned fire and can block the chimney if allowed to build up, leading to lower efficiency and posing the risk of a fire. The use of seasoned wood can help keep the levels of creosote at a minimum and reduce the cost of logs and also help avoid the need for professional cleaning services.

You can also select stoves that use wood and coal which gives you a choice between carbon-neutral energy sources. It is important to remember that coal is not a green fuel and there are concerns regarding the method by which it is mined.

It is recommended to pick an approved stove by Defra, and preferably one that is Ecodesign ready. They will be compliant with the latest emission regulations. The UK building regulations have specific requirements regarding how the flue is installed and the size of the hearth and how far the stove must be from combustible materials, so it's always wise to consult one of our stove experts prior to making a purchase.

Paper and other combustibles such as rubbish and paper should not be put in woodburning devices. They could cause more pollution and, at worst an explosion in the chimney. At best, they will make them less efficient. Other combustibles are lighter than firewood, which means they burn at a lower heat and produce more particles.

It is also important to use only dried, seasoned, split and dried firewood as this will be more efficient in burning. If you use damp or wet wood, it will create plenty of smoke and also create more pollution. It is also recommended to use a high-quality stove pipe to ensure that the temperature of the flue will be sufficient and that it is installed correctly.

Emissions

Wood-burning stoves emit many gases and particles. They produce a lot of fine particulate (PM2.5) which could be absorbed into the lungs, enter the bloodstream, and cause damage to the liver, heart and brain. They also produce carcinogenic compounds like polycyclic aromatic hydrocarbons (PAHs), nitrogen oxides and carbon monoxide. Based on the type of fuel they are burning, some can even release out toxic metals such as arsenic and mercury.

There have been numerous attempts in the US to regulate the amount wood-burning stoves produce pollution with different degrees of success. In 1988, the Environmental Protection Agency set emissions guidelines that basically limited how much pollution new stoves could emit. Since since then, there's been two changes to the regulations. The latest one in 2015 stipulates that all stoves catalytic or non-catalytic release not more than 4 grams of pollution each hour.

These strict rules caused a major shake-up within the industry and 913875 forced hundreds of smaller manufacturers out of business. However they also spurred an effort to create efficient stoves that were durable and produced lower emissions than conventional models. Stove designers looked at and analysed combustion air flow, baffles, combustion chamber shapes, insulating materials, and recirculation systems to make their products better. In time, they were successful.

The emission levels are mostly influenced by the moisture content of the wood burned. The greater the moisture content, the greater emissions a stove can produce. The best way to reduce the emission levels is to using seasoned firewood which has been properly dried over a time of 6-8 months.

According to several studies which compare the impact of exhaust-related particles only, a woodburning stove can create as much particle pollution as 15 diesel vehicles. These tests were not scientifically valid. These studies fail to consider that the majority of particle pollution that cars emit comes from its brakes, engine, and tyres, instead of its exhaust.

Ten blue states are pressing on the EPA to review their carbon emissions and guidelines for air quality for wood-burning appliances. Attorneys general from New York, Washington and Illinois have announced that they will sue EPA if it continues to allow high-emitting wood-burning stoves to continue to be sold in homes across the country.

Maintenance

Although wood-burning stoves are extremely efficient in heating homes but they can be difficult to maintain. A stove will need to be cleaned on a regular basis to keep it looking and functioning correctly. A dirty stove can be detrimental to the health of occupants and www.913875.Xyz - www.913875.xyz, the amount of heat it generates. Cleaning the stove isn't the only maintenance task that needs to be carried out to keep it working well.

Cleaning the interior and exterior of a stove is easy to do. Cleaning a stove is recommended every week or every two weeks depending on how often it is used. It is also recommended to empty the ash from the fire box each time the stove has been used. Spread an old newspaper over the floor prior to scooping the ashes from the stove, and then wear gloves to protect your hands. It's also an excellent idea to utilize a ash container made of metal rather than a bucket, because this will stop rust from forming.

It is important to keep the chimney and flue in good condition. A chimney sweep professional is required once or twice a year to clean the stove and chimney thoroughly. This will prevent creosote off the chimney and decrease the chance of fires in chimneys.

A chimney should also be checked for creosote buildup and cracks along with bird nests and other debris. A professional chimney sweep is able to repair these problems and restore a functioning, safe chimney.

Over time, the glass from a wood-burning stove may be clouded and stained with soot. A mixture of ammonia and water can be sprayed on the glass, then wiped with a cloth until clean. Be careful not to scratch the glass, as this can cause it to shatter and weaken when hot.

Paint that is heat-resistant can be used to re-paint woodburning fireplace in case the paint starts to chip. These paints are available at the majority of retailers for wood stoves and are available in a broad variety of colors.