• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

replacement double glazing window handles UPVC Door Handles

If you're replacing your handles or need to add extra security you can find the right handle for your door. These upvc handle are easy to install and meet the 92mm minimum centre distance of multipoint locks.

The backplate fixing center and the lever/keyhole dimensions are the most important measurements. Compare these measurements to your existing marks carefully before making a purchase.

Lever/Pad

Lever pad door handles are made up of a lever handle on one side and a paddle shaped handle on the other. They are intended for use with key wind locks. However, they can be fitted to multipoint split spindle door locks.

Once you have selected the right handle for your doors the finishes will be displayed in the drop-down menu. Not all styles of handles are available in every finish though and it is recommended to check the technical drawings and sizes sections for the specific product you're looking for to ensure that you can get the right size and fit.

When selecting new lever pad door handle replacements handles made of Upvc it is crucial to make sure that they are in line with the PZ (distance between the spindle of the handle and the centre of the hole for the cylinder) of your existing multipoint door locks, since they have to be in line for the doors to remain locked, either from the inside or outside. The handles we sell are designed to work with a variety of standard cylinder locks, but you should always double-check before purchasing.

If you want to upgrade to dual spindle levers you'll need to take out the handles that are currently in use and then disassemble the lock case. This will require an extra split cylinder inline. They can be purchased separately and we have a full technical diagram to look at in the images for each product.

Once you have removed the screws that hold the handle on your door, it is an ideal idea to loosen them and inspect the mechanism to see the condition it is in. You may need to loosen the screws further in the event that they are not tight, and then you can remove the old handle and spindle and put in your new door handle made of upvc. Before screwing the handle into position, it is a good idea to make sure it is in the right position, and you can do this by placing your finger in the gap between the frame of the door and the handle to ensure that it is in a level position.

Lever/Lever

The lever door handles are used to operate a multi-point lock that uses an Euro cylinder. They can be located on many double upvc doors as well as aluminium and wooden doors. They are available in two varieties, with an interior lever and a paddle outside. Sprung - these have a spring cassette fitted inside the backplate to bring the handle lever into a horizontal position. Non-sprung: These do NOT include a mechanism that can spring the handle lever to a horizontal angle.

To fix a door handle lever that is sagging, you'll need to find the detent access pin or hole. This is usually a small hole or protruding ring, or rectangle, that is located on the base of the handle plate. Once you have located the hole for accessing the detent or pin, you can remove it with the help of a screwdriver.

After the locking window handle is placed horizontally, you can reinstall the screws. Close them to ensure that the handle stays connected to the base plate. It is also advisable to apply a threadlocking adhesive solution to the screw threads to increase the grip and prevent them from loosening over time.

Drooping lever handles on door handles could be the result of many factors. The most frequent cause is that the fixings aren't tight and the lever bearing to get tangled up against the door. It could also be because the levers aren't operated at a straight angle and this is causing the latch mechanism and preventing it from fully springing back into service.

Another common reason is that the sprung lever isn't operating correctly and this is typically due to the sprung not being in the right position within the backplate. The most effective way to determine this is to move the handle and see whether it returns to its horizontal position.

If the door handles aren't tight, it is important to identify the issue fast, as this can lead to excessive wear on the screws, and even to the handle falling off the base plate. It is also recommended to tighten any loose screws on a regular basis to prevent them from becoming looser.

Lever/Snib

The uvpc Window handles for doors made of upvc are also referred to as 'Snib' handle sets and feature a snib button towards the top of the lever that can be pressed down to lock your door in the event that you don't use a dummy lock. These handles are fitted with a Fullex lock 68PZ. (68mm between the spindle and lock centre). We also have a selection of door handles with 68PZ from manufacturers such as Ferco and Fab & Fix.

You can update your home by changing the handles on your doors, whether you are replacing your existing handles or installing new ones on doors that you've constructed. There are many styles of door handles made of upvc with traditional levers on backplate, curved or straight short latches and knob handles that resemble dummy knobs for multi point locks which are ideal for French doors.

Lever on backplate handles are often rectangular in shape but there are also circular or oval shaped versions, which are known as rose door handles. These handles are identified by a lever or a knob that is mounted on a backplate. The backplate can be removed for hidden fixing.

The handles are available in a variety of finishes including coloured and chrome finishes to be matched to your door and hardware such as knobs, hinges and bolts. Some handles come with grub screws to assist in firmly attaching the knob or lever to the spindle. Other handles come with bathroom spindles that can be used to control bathroom locks and incorporate a thumbturn turn and release mechanism, ideal for use on bathroom doors.

Mortise

If your uPVC front door handle is stuck in the open position, the problem is most likely to be related to the tubular latch. This can be caused by a number of things however the most frequent is an absence of lubrication within the latch plate. This can be resolved easily by opening the door and spraying lubricant over the lock and handle. It could also be that the latch plate has become detached from the backplate. This is a more complicated issue that requires a professional.

A multipoint handle system is the best solution for a stuck door handle. These handles are mounted through the faceplate and operated by a key or thumb turn knob which activates the cam that locks the deadbolt. The handles come in various sizes to fit different types of uPVC doors and are available in a variety of attractive finishes that are compatible with the hardware that is currently in use. These handles can be purchased on the internet or through a local locksmith and are easy to install with clear instructions.

To select a replacement handle set, you'll be required to be aware of the PZ size of the cylinder. This is the measurement in millimetres between the inner edge of the frame of the door and the centre of the hole in the handle. You should also be aware of whether your door has a hook style lock or a mortise style lock. Once you know these measurements, the most efficient way to find the correct handles is to filter by brand option on the website. This will narrow down the choices and allow you to choose the right size from there.

A typical handle set includes a handle unit, two screws of different lengths, drill guides and instructions for installation. Smart versions, like the Igloohome Smart Mortise 2+ include a mortice lock with a keypad. These are more sophisticated units and are best suited for professionals who install them or competent DIYers. Some handle sets have an array of other accessories, such as weather strips, that can be used to improve the look of the door.