• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Window Sash Repairs

Check the windows sashes regularly for signs of damage, mildew and mold. By catching these problems early you will save money on repairs in the future.

The sash is the interior frame that is vertically moved upwards or downwards in windows that open. This article will teach you how to perform easy repairs to your sash.

Weather Stripping

Wood window repair sashes give an elegant look to your home. If properly maintained, they can last for many years. However, they can be damaged or degraded over time due to exposure and normal wear and tear. Sash repair experts can restore windows back to their original condition and maintain their appearance much longer than replacement windows.

The first step in repair sash windows is to address weather stripping, which can be found on both the sash as well as the frame. If it's damaged or worn out, it could cause drafts and other problems. Begin by identifying the window brand and the manufacturer's date (etched on the glass's corners or on the aluminum spacers between panes). Take the sash off and mark its width and height so you can get replacement weather stripping that matches.

Then, take the sash from its holder and place it on an even surface that allows you to reach all four sides. If the sash is double glazed window repairs near Me-hung, take out the weights using their ropes that should be buried in the jamb lining. After you have removed the sash using the utility knife, take off the weather stripping that was left by hand or with a putty knife.

When the sash is clean it is time to replace the parting stops. They are long pieces of wood that divide the two sashes. Pam prefers the standard 1/2-inch by 3/4 inch window trimmings from the lumberyard. However, you could substitute with a scrap piece of wood.

After removing the parting stop and trimming it to length and then apply a thin layer of glazing compound on the bottom of the sash. Smooth the compound with your putty knife, and allow it to dry for at least one day. When it's completely dried then apply a top coat of acrylic latex paint. This will protect the putty and give your sash a modern look.

Sash Hardware

The hardware that holds the window sashes can wear out with time and use. This can result in a door or a upvc window repairs that is difficult to open or close. It's important to know that replacing or repairing this hardware is often simple and inexpensive. If a sash is difficult to operate try spraying lubrication into the jamb channel and then slide it open to see if it solves the issue. If the issue persists it's likely to be due to the sash's balance. You will need to take off the window sash in order to reach this hardware.

Window sashes need to open and close without much effort. However, this could be difficult if weights are worn out or the sash-to rail connecting rail isn't properly glazed. This problem can be due to a variety of factors that include the lack of maintenance or an unmatched weight rating.

If the hinge arms on a window begin to sag this can cause the sash drag and then hit the frame at the opposite corner (Photo 1). To fix this issue, first make sure the sash is firmly seated in the frame's opening and then remove it from the window. If the sash has been screwed to the hinge arm, you'll have to remove the hinge arm and replace it (Photo 2). Next, install the new sash (Photo 3).

Windows that are old, especially in older homes, can be difficult to open and close because of sagging hinges and a general inefficiency. Sometimes, a few simple fixes can make these windows operate smoothly again and save homeowners money on energy bills.

It is important to have the tools you need before you start. Begin by marking the location of the hinge channel on the frame with pencil (Photo 1). This will help you to put the channel in the right location after you've completed. Remove the sash and remove the hardware, including the parting beads (Photo 2) and the chains or cords which hold it in place. Heat gun with nozzle shield and a medium setting will soften any putty that has been hardened. Take off the old sash and keep it in a bag with a label.

Sash Weights

Sash weights are able to be replaced to improve the operation of your window repairs sash, and also reduce energy costs. Sash weights are heavy lead or iron cylinders enclosed in a hidden cavity and linked to the moveable sash by a rope. These weights function as counterbalances and allow you to open and close the window repairs without the need for mechanical or electrical devices. The sash weights are often disregarded or disabled by homeowners and turned into scrap when they fail; therefore you might need to find replacements.

It's not easy to retrieve an sash-weight which has fallen from the cavity, so you'll need to find one that fits correctly. You will also need an additional piece of string, a length sash cord and some sash pulleys to tie the new sash weights the sash cord.

Older wood windows are joined using mortise and tenon joints. The wood pegs that keep the components together can be removed with the use of a pin punch and hammer. The majority of them have large diameters on one side and a smaller diameter on the other, which is why it is essential to remove the smaller-diameter sides first. Sashes that were made later in the century made use of glue instead of pegs and can be separated by cutting the glue line with an instrument, and then tapping the mortised area loose with mallets.

After the sash is released, you can remove sash stops and gain access to the pockets for weights. Usually this is accomplished by drilling an opening at the bottom of each jamb. This hole is covered with an unfinished wooden panel that can be removed to reveal the inner workings.

Once you have the sash stopped and the access panel removed, you will be able to take off the old sash weight and replace it with the new. Make sure you weigh the sash prior to you begin, as the old weights could be a different size than what you require. Once the new weight is installed, thread an appropriate length of string through the pulling mechanism. Then, you can nail the string to the boxed frame, but leave a few inches of string protruding from the head to allow for future adjustments.

Sash Cords

Most double glazed window repairs-hung windows of the past come with a chain or cord attached to the weights which helps keep the sashes in balance within the jamb. Over time, these cords could break, making it impossible to raise the window. A new sash cable will give you the ability to move and lower the sash, and keep it in place when opened.

To replace sash cords, the first step is to remove the access panels from the jambs. They are typically screwed or nailed in and require removal. It is possible to remove them using an axe or hammer, but it is always best to lay out dust sheets before beginning any work.

After removing the access panel, you are able to begin to work on the sash. Prise the narrow parting beads (also called "tie rails") out of their grooves with a chisel or flat bar. It is essential to be patient, as these are often wedged or nailed in place. If the sash is still in place, break the mortise and tenon joints using a hammer and pin punch or screwdriver, then remove the wood pegs that are on each piece. It should now be possible to move the sash back and forth freely, though it may require lubrication if it feels stiff.

With the sash open, measure enough sash cord/chain to extend from the pulley in the top of the jamb to the sash slot at the bottom. Cut the cord or chain and attach it in Step 6 above. You can do this with a hammer, nails or screws. However nails are less likely to cause damage.

If you don't have an item that replaces the old counterbalance system it is recommended to keep the original balancing weights in place. They're not costly and are easy to install if purchased them from salvage shops for architectural use. Based on the size of your window, one or two sashweights may be needed to keep it in an open position.